« Thomas Aaron Winslow 8ft Billiard Table with Slate | Home | Imperial 8ft Grant Pool Table Color: Marine Blue, Style Antique Walnut »
Thomas Aaron Victoria 8ft Billiard Table with Slate
By Admin | November 16, 2009
- The base frame is constructed of solid kiln dried hardwoods and select laminated wood veneers. The cross bracing is the backbone of the table, and is made from solid timber 1¾ x 4, through bolted at 10 points for unitizing the cabinet for maximum strength and stability. The insides of all our cabinets are stained and sealed to lock out moisture. Both the outside and inside of the cabinet have equally applied sealers to keep wood frame stable. We use a multi-layer, hand applied glaze finish with highlighting, only found on the finest furniture. Our finish is hand applied by furniture finishing experts which brings out the natural beauty of the wood grain, unlike the standard dull finish found on most pool tables.
- Block lamination provides superior stability and guarantees no warping or twisting. The same hardwood is used on entire rail and subrail. Aprons are permanently bonded for unsurpassed straightness and strength for years of accurate play. Less vibration for more accurate ball rebound – 3/8″ diameter bolts are threaded into an Iron Jaw TM nut plate. This gives the rail-to-table joiners approximately 80% more downward holding strength than standard 5/16″ t-nuts. *NO DEAD SPOTS!* – The slots where the nut plates are inserted into the rails are plugged with wood blocks then glued and nailed, to give solid surface backing to rubber cushions. Uniform cushion height for accurate playability – A relief groove is cut in the subrail to provide a place for the installer to staple the cloth. This is critical due to the fact that the rail cloth and staples can bunch up under the rail and cause varying cushion heights. Our cloth stapling relief groove helps keep the cushion height uniform along each rail for accurate playability. Full K-66 profile: BCA specified for the industry and tournaments for almost a century. Made with an exclusive formulation from 100% high quality natural gum rubber with no additional fillers. UV degeneration and oxidation inhibitors are blended into the rubber formulation for years of accurate play. A canvas is vulcanized to the top surface of the cushion, in order to control accuracy of ball deflection. The canvas is also vulcanized to the back of the cushion to strengthen the bond to the rail. The rail surfaces are highlighted with a unique furniture finishing glaze, then hand rubbed to bring out the luster of the natural wood grain. Rail surfaces are multi-step coated with a highly durable scratch resistant top coat that is applied to give a long lasting finish.
- Standard sights are genuine mother of pearl with abalone inset diamonds, this is an upgrade from other manufacturers.
- 1″ inch certified professional three piece slate. Diamond honed with an over sized 60″ grinding wheel for a truly accurate playing surface. Slate surface is computer controlled with a tolerance to 1/10,000 of an inch.
- The highest quality 75/25 blend of wool and nylon are used for little to no, pilling for a fast and durable playing surface. Bathed in DuPont Teflon for true water and stain resistance. Each bolt of cloth is carefully inspected to be free of knots and loose fibers assuring accurate ball roll and playability.
Product Description
With its richly grained hardwoods, exotic burls and hand-carved details, the Victoria makes a distinctive, yet traditional design statement, while offering superior playability and durability. This gracefully proportioned table features a hand-applied finish, saddle grade leather pockets and genuine mother of pearl and abalone inlaid rail sights. Coordinating cue racks, chairs and accessories offer the same style, design features and high quality craftsmanship in every detail…. More >>
Thomas Aaron Victoria 8ft Billiard Table with Slate
Topics: Pool Tables | No Comments »