• The base frame is constructed of solid kiln dried hardwoods and select laminated wood veneers. The cross bracing is the backbone of the table, and is made from solid timber 1¾ x 4, through bolted at 10 points for unitizing the cabinet for maximum strength and stability. The insides of all our cabinets are stained and sealed to lock out moisture. Both the outside and inside of the cabinet have equally applied sealers to keep wood frame stable. We use a multi-layer, hand applied glaze finish with highlighting, only found on the finest furniture. Our finish is hand applied by furniture finishing experts which brings out the natural beauty of the wood grain, unlike the standard dull finish found on most pool tables.
• Block lamination provides superior stability and guarantees no warping or twisting. The same hardwood is used on entire rail and subrail. Aprons are permanently bonded for unsurpassed straightness and strength for years of accurate play. Less vibration for more accurate ball rebound – 3/8″ diameter bolts are threaded into an Iron Jaw TM nut plate. This gives the rail-to-table joiners approximately 80% more downward holding strength than standard 5/16″ t-nuts. *NO DEAD SPOTS!* – The slots where the nut plates are inserted into the rails are plugged with wood blocks then glued and nailed, to give solid surface backing to rubber cushions. Uniform cushion height for accurate playability – A relief groove is cut in the subrail to provide a place for the installer to staple the cloth. This is critical due to the fact that the rail cloth and staples can bunch up under the rail and cause varying cushion heights. Our cloth stapling relief groove helps keep the cushion height uniform along each rail for accurate playability. Full K-66 profile: BCA specified for the industry and tournaments for almost a century. Made with an exclusive formulation from 100% high quality natural gum rubber with no additional fillers. UV degeneration and oxidation inhibitors are blended into the rubber formulation for years of accurate play. A canvas is vulcanized to the top surface of the cushion, in order to control accuracy of ball deflection. The canvas is also vulcanized to the back of the cushion to strengthen the bond to the rail. The rail surfaces are highlighted with a unique furniture finishing glaze, then hand rubbed to bring out the luster of the natural wood grain. Rail surfaces are multi-step coated with a highly durable scratch resistant top coat that is applied to give a long lasting finish.
• Standard sights are genuine mother of pearl with abalone inset diamonds, this is an upgrade from other manufacturers.
• 1″ inch certified professional three piece slate. Diamond honed with an over sized 60″ grinding wheel for a truly accurate playing surface. Slate surface is computer controlled with a tolerance to 1/10,000 of an inch.
• The highest quality 75/25 blend of wool and nylon are used for little to no, pilling for a fast and durable playing surface. Bathed in DuPont Teflon for true water and stain resistance. Each bolt of cloth is carefully inspected to be free of knots and loose fibers assuring accurate ball roll and playability.

Product Description
With its richly grained hardwoods, exotic burls and hand-carved details, the Victoria makes a distinctive, yet traditional design statement, while offering superior playability and durability. This gracefully proportioned table features a hand-applied finish, saddle grade leather pockets and genuine mother of pearl and abalone inlaid rail sights. Coordinating cue racks, chairs and accessories offer the same style, design features and high quality craftsmanship in every detail…. More >>

Thomas Aaron Victoria 8ft Billiard Table with Slate

• Block lamination provides superior stability and guarantees no warping or twisting. The same hardwood is used on entire rail and subrail. Aprons are permanently bonded for unsurpassed straightness and strength for years of accurate play. Less vibration for more accurate ball rebound – 3/8″ diameter bolts are threaded into an Iron Jaw TM nut plate. This gives the rail-to-table joiners approximately 80% more downward holding strength than standard 5/16″ t-nuts. *NO DEAD SPOTS!* – The slots where the nut plates are inserted into the rails are plugged with wood blocks then glued and nailed, to give solid surface backing to rubber cushions. Uniform cushion height for accurate playability – A relief groove is cut in the subrail to provide a place for the installer to staple the cloth. This is critical due to the fact that the rail cloth and staples can bunch up under the rail and cause varying cushion heights. Our cloth stapling relief groove helps keep the cushion height uniform along each rail for accurate playability. Full K-66 profile: BCA specified for the industry and tournaments for almost a century. Made with an exclusive formulation from 100% high quality natural gum rubber with no additional fillers. UV degeneration and oxidation inhibitors are blended into the rubber formulation for years of accurate play. A canvas is vulcanized to the top surface of the cushion, in order to control accuracy of ball deflection. The canvas is also vulcanized to the back of the cushion to strengthen the bond to the rail. The rail surfaces are highlighted with a unique furniture finishing glaze, then hand rubbed to bring out the luster of the natural wood grain. Rail surfaces are multi-step coated with a highly durable scratch resistant top coat that is applied to give a long lasting finish.
• Standard sights are genuine mother of pearl with abalone inset diamonds, this is an upgrade from other manufacturers.
• 1″ inch certified professional three piece slate. Diamond honed with an over sized 60″ grinding wheel for a truly accurate playing surface. Slate surface is computer controlled with a tolerance to 1/10,000 of an inch.
• The highest quality 75/25 blend of wool and nylon are used for little to no, pilling for a fast and durable playing surface. Bathed in DuPont Teflon for true water and stain resistance. Each bolt of cloth is carefully inspected to be free of knots and loose fibers assuring accurate ball roll and playability.

Product Description
With its richly grained hardwoods, exotic burls and hand-carved details, the Winslow makes a distinctive, yet traditional design statement, while offering superior playability and durability. This gracefully proportioned table features a hand-applied finish, saddle grade leather pockets and genuine mother of pearl and abalone inlaid rail sights. Coordinating cue racks, chairs and accessories offer the same style, design features and high quality craftsmanship in every detail…. More >>

Thomas Aaron Winslow 8ft Billiard Table with Slate

• Block lamination provides superior stability and guarantees no warping or twisting. The same hardwood is used on entire rail and subrail. Aprons are permanently bonded for unsurpassed straightness and strength for years of accurate play. Less vibration for more accurate ball rebound – 3/8″ diameter bolts are threaded into an Iron Jaw TM nut plate. This gives the rail-to-table joiners approximately 80% more downward holding strength than standard 5/16″ t-nuts. *NO DEAD SPOTS!* – The slots where the nut plates are inserted into the rails are plugged with wood blocks then glued and nailed, to give solid surface backing to rubber cushions. Uniform cushion height for accurate playability – A relief groove is cut in the subrail to provide a place for the installer to staple the cloth. This is critical due to the fact that the rail cloth and staples can bunch up under the rail and cause varying cushion heights. Our cloth stapling relief groove helps keep the cushion height uniform along each rail for accurate playability. Full K-66 profile: BCA specified for the industry and tournaments for almost a century. Made with an exclusive formulation from 100% high quality natural gum rubber with no additional fillers. UV degeneration and oxidation inhibitors are blended into the rubber formulation for years of accurate play. A canvas is vulcanized to the top surface of the cushion, in order to control accuracy of ball deflection. The canvas is also vulcanized to the back of the cushion to strengthen the bond to the rail. The rail surfaces are highlighted with a unique furniture finishing glaze, then hand rubbed to bring out the luster of the natural wood grain. Rail surfaces are multi-step coated with a highly durable scratch resistant top coat that is applied to give a long lasting finish.
• Standard sights are genuine mother of pearl with abalone inset diamonds, this is an upgrade from other manufacturers.
• 1″ inch certified professional three piece slate. Diamond honed with an over sized 60″ grinding wheel for a truly accurate playing surface. Slate surface is computer controlled with a tolerance to 1/10,000 of an inch.
• The highest quality 75/25 blend of wool and nylon are used for little to no, pilling for a fast and durable playing surface. Bathed in DuPont Teflon for true water and stain resistance. Each bolt of cloth is carefully inspected to be free of knots and loose fibers assuring accurate ball roll and playability.

Product Description
With its richly grained hardwoods, exotic burls and hand-carved details, the Monterey makes a distinctive, yet traditional design statement, while offering superior playability and durability. This gracefully proportioned table features a hand-applied finish, saddle grade leather pockets and genuine mother of pearl and abalone inlaid rail sights. Coordinating cue racks, chairs and accessories offer the same style, design features and high quality craftsmanship in every detail…. More >>

Thomas Aaron Monterey 8ft Billiard Table with Slate

• Elegant styling and commercial quality
• Available in ball return and drop pocket models
• 3-Piece, 1″ thick Brazilian slate bed
• Superior sub-frame supports the slate on all sides
• Attractive medium Cherry finish

Product Description
The Playcraft Southport sets the new standard in commercial quality and elegantly styled pool tables. The 3-Piece, 1″ thick Brazilian slate bed is book matched and honed to 1/1000 th of an inch. As with all Playcraft tables, the superior sub-frame supports the slate on all sides. Product ships freight included but professional assembly is required…. More >>

Playcraft Sothport – 8′ institutional slate pool table,drop pocket SP-8P

• Eliminator 7ft Non-Slate Pool Table with outside dimensions of 87in x 48in / Play Surface Height: 31in / Weight: 248 lbs.
• Playfield of 39in x 78in / MDF Playfield
• Rail Cap 32in high
• Features 6in Leg Levelers, Ball Storage Box
• High pressure Laminate on Both sides

Product Description
The Imperial Eliminator 7ft Non-Slate Pool Table is a premium game table that comes fully assembled and includes all the accessories you need for an exciting home billiards game. The Eliminator Non-Slate Table features high pressure laminate on both sides as well as a ball storage unit…. More >>

Imperial Eliminator 7 Foot Non Slate Pool Table with Accessories

• Elegant styling and commercial quality
• Available in ball return and drag pocket models
• Superior sub-frame supports the slate on all sides
• Attractive medium cherry finish

Product Description
The Playcraft Oak Knight sets the new standard in commercial quality and elegantly styled pool tables. The 3-Piece, 1″ thick Brazilian slate bed is book matched and honed to 1/1000 th of an inch. As with all Playcraft tables, the superior sub-frame supports the slate on all sides. Product ships freight included but professional assembly is required…. More >>

Playcraft Oak Knight – 7′ slate pool table, drop pocket- KN-7P

• Elegant styling and commercial quality
• available in ball return and drop product models
• Superior sub-frame supports the slate on all sides
• attractive medium cherry finish

Product Description
The Playcraft Black knight sets the new standard in commercial quality and elegantly styled pool tables. The 3-Piece, 1″ thick Brazilian slate bed is book matched and honed to 1/1000 th of an inch. As with all Playcraft tables, the superior sub-frame supports the slate on all sides. Product ships freight included but professional assembly is required…. More >>

Playcraft BL-8P Black Knight – 8′ slate pool table, drop pocket

• Elegant styling and commercial quality
• Available in ball return and drop pocket models
• Superior sub-frame supports the slate on all sides
• 6″ Wide pedestal legs with duck feet levelers
• Attractive medium Cherry finish

Product Description
The Playcraft Southport sets the new standard in commercial quality and elegantly styled pool tables. The 3-Piece, 1″ thick Brazilian slate bed is book matched and honed to 1/1000 th of an inch. As with all Playcraft tables, the superior sub-frame supports the slate on all sides. Product ships freight included but professional assembly is required…. More >>

Play Craft Southport – 9′ institutional slate pool table ,drop packet

• Elegant styling and commercial quality
• Available in ball return and drag pocket models
• Superior sub-frame supports the slate on all sides
• Attractive medium cherry finish

Product Description
The Playcraft Oak Knight sets the new standard in commercial quality and elegantly styled pool tables. The 3-Piece, 1″ thick Brazilian slate bed is book matched and honed to 1/1000 th of an inch. As with all Playcraft tables, the superior sub-frame supports the slate on all sides. Product ships freight included but professional assembly is required…. More >>

Playcraft Oak Knight – 7′ slate pool table, drop pocket- KN-8P

• Elegant styling and commercial quality
• Available in ball return and drag pocket models
• superior sub-frame supports the slate on all sides
• Attractive medium cherry finish

Product Description
The Playcraft Silver Knight sets the new standard in commercial quality and elegantly styled pool tables. The 3-Piece, 1″ thick Brazilian slate bed is book matched and honed to 1/1000 th of an inch. As with all Playcraft tables, the superior sub-frame supports the slate on all sides. Product ships freight included but professional assembly is required…. More >>

Playcraft Silver Knight – 8′ slate pool table,ball return SV-8R